Item TF-1U4JSBS
Automatic Triaxial Test System
- Series
- AUTOTRIAXQUBE
New, revolutionary, all-in-one automatic triaxial testing system integrating the many components of triaxial testing into one, single compact system.
MeetsEN 17892:9
Technical specifications
| Maximum load capacity | 25 kN. |
|---|---|
| Maximum sample size | 70 mm diameter x 140 mm height. |
| Maximum confining pressure | 3,500 kPa. |
| Maximum back pressure | 3,500 kPa. |
| Pressure resolution | 0.1 kPa. |
| Maximum volume capacity | 250 cc. |
| Volume resolution | 0.001 cc. |
| Piston travel | 100 mm. |
| Integrated de-airing tank | 20 liters. |
| Sensors | Submersible load cell (25 kN), displacement transducer (50 mm), Pressure transducers (3500 kPa). |
| Units | SI or US Customary. |
Technical notes
- 110, 220V 50-60 Hz, 1 pH.
Features
- Space Saving
- Occupying less than one square meter, the AUTOTRIAXQube is the ideal solution for any laboratory where space is at a premium.
- Easy to Install
- There’s no need for external panels, tank, or hydraulic connection — simply connect the AUTOTRIAXQube to water and power supply and start testing.
- Fast Water De-Airing
- The built-in vacuum pump, tank, control valves and cavitation system will de-air the water quickly and efficiently down to levels of dissolved air acceptable for triaxial test methods.
- Integrated Triaxial Cell
- Thanks to its lifting system and its three internal columns frame, the triaxial cell is easy to handle. The lifting mechanism allows the operator to raise the cell to its highest position and rotate it through 90 degrees, until it’s safely held in place with a magnetic latch. This removes the need to lift the total weight of the cell while freeing space on the work bench for sample preparation tools.
Show 16 more features
- Integrated Vacuum System
- For a streamlined and time saving sample preparation process.
- Built-in Ingenious Hydraulic System
- Speeds up the time required to set-up the system correctly (water circuit saturation, pressure system and triaxial cell ) avoiding any possible damage to the sample already positioned in the triaxial cell.
- Reliable and Accurate
- The system is programmed with standardized test procedures reducing inconsistencies from operator variables, or other unpredictable external factors. So, there is no need to collect and save data manually, or perform complex calibration procedures.
- Efficient and Repeatable
- AUTOTRIAXQube can complete the whole test — from saturation to failure — in fully automatic mode without any interruption, saving time, minimizing operator intervention while increasing accuracy.
- Versatile and Expandable
- Capabilities can be expanded to perform permeability testing simply by adding a third pressure line. Advanced measurements can be also obtained with the addition of a Bender Element system, or local strain sensors.
- User-friendly Software
- The user-friendly software and desktop PC* allow the operator to control all phases of testing over a fast Ethernet connection. The AUTOTRIAXQube can also connect using Wi-Fi which is useful for remote training and support. If you already use our flexible and renowned AUTOTRIAX software as part of your existing system, there is no need to invest in any additional software as the AUTOTRIAXQube can easily be integrated and controlled as an independent system by your existing PC and software:
- Effective/total stress: (CU/CAU**,CD/CAD**, UU) (Included in the machine)
- Stress path (to be ordered separately)
- k 0 test (to be ordered separately)
- To be ordered separately. Please note that an optional all-in-one PC model is also available.; ** Anisotropic consolidation according to EN 17892:9 is available. For anisotropic consolidation, a vacuum top cap is required.
Ordering information
| 29-WF40Q02 | AUTOTRIAXQube – All-in one fully automatic triaxial testing system. 110-220V, 50-60Hz, 1ph |
|---|
Accessories
| — | All existing Wykeham Farrance triaxial cell accessories such as pedestals, top caps, membranes, etc., for use with the 70 mm banded triaxial cell (from 38 up to 70mm) are compatible with the AUTOTRIAXQube. |
|---|---|
| — | Additional Testing with Optional Upgrades |
| — | Permeability test |
| — | CRS (Constant Rate of Strain) |
| — | Unconfined test |
| — | Bender elements |
| — | On Sample |
| 29-WFD1A2/SW2 | Stress path software with manual and automatic performance steps |
| 29-WFD1A2/SW3 | Ko software |
| 29-WFD1A2/SW5 | Soil Triaxial Permeability test software including manual and automatic mode test. |
Show 6 more items
| 29-WFD1A2/SW7 | UC (Unconfined compression) software module, includes manual and automatic modes |
|---|---|
| 29-WF40Q02/PM | AUTOTRIAXQube – upgrade kit for performing permeability test. 110-220V, 50-60Hz, 1ph |
| 29-WF40Q02/PC | AUTOTRIAXQube – All-in one PC Assembly 110-220V, 50-60Hz, 1ph |
| 26-WF0360/AD | AD Adapter for performing CRS – Constant Rate of Strain test with triaxial cell model 28-WF4070: Specimen size: 63.5 x 25.4 mm (diameter x height) Upper and lower porous discs and perforated loading cap |
| 26-WF0360/1 | Cutting ring and accessories for preparation of CRS sample |
| 29-WF40Q02/AR | AUTOTRIAXQube – Access ring with six port for using bender elements or on sample transducers. |