Item TF-1U2UQAO
Automatic Triaxial Test System
- Series
- AUTOTRIAX EmS
The AUTOTRIAX EmS is an advanced triaxial testing system that can automatically perform up to 6 entire and independent tests at the same time, from start to finish, without any human intervention.
MeetsBS 1377
Technical specifications
| Maximum no. of simultaneous tests | 6 |
|---|---|
| Maximum no. of channels | 96 (in the most extended configuration) |
| Capacity | 50 kN and 100 kN |
| Speed range | 0.00001 – 99.99999 mm/min |
| Specimen range | 38,50,70,100,150 mm diameter |
| Water working pressure | 1700 or 3500 kPa |
| Pressure resolution | 0.1 kPa |
| Maximum capacity of pressure / volume controller | 250 cc |
| Volume resolution | 0.001 cc |
| Effective resolution | 131000 points |
Technical notes
- LAN communication
Features
- Total and effective stress tests UU (unconsolidated undrained), CU (consolidated undrained), and CD (consolidated drained) isotropic conditions according to ASTM and BS Standards;
- Stress path tests following MIT and Cambridge methods;
- K0 anisotropic volume controlled tests;
- Permeability tests in triaxial cells according to BS 1377: 6;
- Unsaturated soil triaxial test with control of matric suction using the axis translation method.
- CRS – Constant Rate of Strain
- Unconfined compression
- CBR (California Bearing Ratio )
Show 11 more features
- 24/7 testing without interruption, maximizing productivity and reducing demands on your staff.
- Automatic execution of up to six independent triaxial tests from start to finish with only one PC;
- Fully PC control system with multitasking, user-friendly Windows-based, the PC software complies with relevant standards;
- High-speed PC closed loop control for continuous monitoring and instantaneous reaction of systems components;
- Modular design for easy expansion of the system, just adding proper software packages and components;
- Maximum flexibility with four models of water pressure / volume controllers;
- External factors and inconsistencies between different operators are minimized; test procedures are always repeatable and compliant;
- Banded reinforced triaxial cell for max working pressure up to 3500 kPa, suitable also for extension tests;
- Compatible with on-sample transducers and bender elements;
- Space saving design;
- Air compressor not required (with exception of unsaturated soils tests).
Accessories
| The proper model can be selected from our range (see triaxial load frame TRITECH and Banded triaxial cells or Double wall triaxial cells required for unsaturated tests) or, as an alternative, existing machines can be used. |
| Data acquisition and control unit Data acquisition and control unit transmitting data and information between the software and all the active components, such as pressure controllers and Tritech triaxial load frame. |
| Pressure/volume controller Four models are available depending on max pressure capacity (3500 or 1700 kPa) and number of pressure lines (one or two). |
| Triaxial test automatic control and processing software. The AUTOTRIAX EmS software is a comprehensive and user-friendly interface between the operator and the testing system. |
| The Autotriax EmS configurations can be extended and expanded in subsequent steps, to control further tests by adding proper components. These operations can be easily made on-site just configuring the user-friendly software, as a plug-and-play system. |