Item 50-C10F02-2
Automatic Compression Control Console
- Series
- AUTOMAX PRO-M
Fitted with superior hydraulics, the AUTOMAX PRO-M can also perform, in addition to standard failure tests, the Modulus of Elasticity Determination test.
MeetsASTM C39 · EN 12390-3
Technical specifications
| AUTOMAX PRO-M AUTOMATIC POWER AND CONTROL SYSTEM | Hydraulics |
|---|---|
| DC motor, | 720W, 50-60Hz |
| Maximum working pressure | 700 bar |
| Active control of up to | 4 frames by selection via display/PC (third and fourth frame as option). See accessories. |
| ES Energy Saving technology to reduce the power consumption and enable silent operation | Flow-sharing technology to perform loading and unloading cycles at controlled rate |
| 524,000 points high-resolution/stability analog channels | 6 channels to be factory configured: |
| Control frequency | 250 Hz |
| Sampling frequency | 250 Hz |
| Unlimited storage capacity for test data on internal | 8 GB SD card |
| USB port for test data storage on external USB memory stick and for firmware upgrade | Ethernet port for PC / Internet /network communication |
| Optional integrated graphic printer including Load-Time plot | RS 232 port for data downloadingin ASCII format |
| 2 channels for load sensors | 2 channels for load or displacement/strain sensor |
| Recording facility for up to 10 test profiles for each channel including | type of test (e.g. compression, flexural, indirect tensile), specimen size and shape, load rate, test standard and other general information. Each one of the recorded test profiles can be recalled automatically to save time |
| Overall dimensions | (hxlxd) 1292x350x450 mm |
Show 1 more specifications
| Weight approx. | 80 kg |
|---|
Technical notes
- Load/unload electrovalve for test execution via display/PC and automatic stop at specimen failure
- Hardware
- 7”, 800 x 480 pixel, 16 M colors, icon-driven capacitative sensing touchscreen graphic display
- 2 channels for displacement/strain sensors
- Firmware
- Execution of compression, flexure, indirect tensile, ACV tests in automatic mode with load rate controlled by a closed-loop P.I.D. system
- Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
- Possibility to reach at controlled speed a load target and to keep a steady loading phase.
- Simultaneous display of load, specific load, actual load rate, load/time and stress/strain graph
- Saving of the specimen failure type (to EN or ASTM) in the test results
- Automatic performance of Elastic Modulus tests according to the main International Standards with automatic calculation of tests results
- Download data to internal printer (optional) or to PC via RS 232 port or to USB memory stick
- PC / network communication via Ethernet
- Multi-coefficient linearization of the calibration curve for better accuracy at low loads thus avoiding the use of a second pressure transducer
- Improved PID algorithm and Multi PID selection. Up to 3 different PID settings can be tuned for a variety of materials (ACV, flexure, compression with neoprene pads, etc.)
- Compatible with the newly released Datamanager software, tailored for construction material testing laboratories, for real-time data acquisition, display and management
- Peripheral devices integration and web services available as option (see page…)
- Automatic load measurement verification procedure, by connecting suitable load cells and our digital readout unit to PC
- Language selection (including Cyrillic and Chinese)
- Unit selection (kN, ton, lbf)
- USB port for firmware upgrade and safe backup of the original configuration data (PID, calibration, etc.), in case of loss and/or data corruption. The restore of the machine to the factory settings is easy avoiding the need of any technical support.
Features
- Smart automatic and connected concrete Power and Control System for standard failure testing.
- AUTOMAX PRO-M Power Control System fitted with superior hydraulics can also perform, in addition to standard failure tests, the Modulus of Elasticity Determination test.
- Huge boost in efficiency and error elimination: LinK-LAB – Integrated testing station solution for seamless connection and data inputs from many ancillary devices for dimensional measurement, weight, bar code, etc.
- Fully automatic – time saving: Full test-cycle automation maximizes productivity and ensures tests are performed accurately according to pre-set methods, eliminating operator variables.
- Highly accurate and energy saving: Our DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
- Intuitive, quick and simple operation: The integrated control system features an intuitive 7” color graphical display, which works like a tablet or smart-phone, and makes AUTOMAX PRO-M quick and simple to operate.
- Standards compliant – peace of mind: Hardware and firmware are in total compliance with all the main international concrete testing standards including ASTM C39 and EN 12390-3.
- Multilingual functionality: The system is available in multiple languages and is fully compatible with non-Latin characters for Chinese, Cyrillic (and more).
Ordering information
| — | Serial printer |
|---|---|
| 50-Q60P/PR | Upgrade of AUTOMAX PRO system to incorporate a serial graphic printer in the rear panel, allowing results (including a load/time plot) to be printed at the end of test |
| — | Third and fourth frame connection The AUTOMAX PRO System, which can control two frames as standard, can be upgraded with a hydraulic valve for controlling (not simultaneously) a third and a fourth frame. Note: when connecting a low capacity frame (i.e. flexural or cement) pressure regulator 65-L1400/X5 may be necessary. Please ask our technical department. |
| 50-C10D/3F | Electrovalve for AUTOMAX PRO System to control a third frame. |
| 50-C20E/4F | Electrovalve for AUTOMAX PRO System to control a fourth frame. |
Accessories
| Compression and Flexural Frames |
| Data manager PC software |