Item TF-0T1AYGG
Automatic Compression Control Console
- Series
- AUTOMAX PRO Smart-Line
AUTOMAX PRO belongs to the CONTROLS’ Smart-Line range of control console for automatic standard failure tests and advanced concrete mechanical properties assessment.
MeetsAS1012.9 · EN 12390-3
Technical specifications
| AUTOMAX PRO AUTOMATIC POWER AND CONTROL SYSTEM | Hydraulics |
|---|---|
| DC motor, | 720W, 50-60Hz |
| Maximum working pressure | 700 bar |
| Active control of up to | 4 frames by selection via display/PC (third and fourth frame as option). See accessories. |
| ES Energy Saving technology to reduce the power consumption and enable silent operation | Hardware |
| 524,000 points high-resolution/stability analogue channels | 4 channels for load sensors |
| Control frequency | 250 Hz |
| Sampling frequency | 250 Hz |
| Unlimited storage capacity for test data on internal | 8 GB SD card |
| USB port for test data storage on external USB memory stick and for firmware upgrade | Ethernet port for PC / Internet /network communication |
| Optional integrated graphic printer including Load-Time plot | RS 232 port for data downloading in ASCII format |
| Simultaneous display of load, specific load, actual load rate, load/time graph | Zoom option on the test graph |
| Recording facility for up to 10 test profiles for each channel including | type of test (e.g. compression, flexural, indirect tensile), specimen size and shape, load rate, test standard and other general information. Each one of the recorded test profiles can be recalled automatically to save time |
| Overall dimensions | (hxlxd) 1292x350x450 mm |
Show 1 more specifications
| Weight approx. | 80 kg |
|---|
Technical notes
- Load/unload electrovalve for test execution via display/PC and automatic stop at specimen failure
- 7”, 800 x 480 pixel, 16 M colours, icon-driven capacitative sensing touchscreen graphic display
- Wi-Fi or GSM module available as option
- Firmware
- Execution of compression, flexure, indirect tensile, ACV tests in automatic mode with load rate controlled by a closed-loop P.I.D. system
- Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
- Possibility to reach at controlled speed a load target and to keep a steady loading phase.
- Saving of the specimen failure type (to EN or ASTM) in the test results
- Download data to internal printer (optional) or to PC via RS 232 port or to USB memory stick
- PC / network communication via Ethernet
- Multi-coefficient linearization of the calibration curve for better accuracy at low loads thus avoiding the use of a second pressure transducer
- Improved PID algorithm and Multi PID selection. Up to 3 different PID settings can be tuned for a variety of materials (ACV, flexure, compression with neoprene pads, etc.)
- Compatible with the newly released Data nmanager software, tailored for construction material testing laboratories, for real-time data acquisition, display and management
- Peripheral devices integration and web services available as option (see page…)
- Automatic load measurement verification procedure, by connecting suitable load cells and our digital readout unit to PC
- Language selection (including Cyrillic and Chinese)
- Unit selection (kN, ton, lbf)
- USB port for firmware upgrade and safe backup of the original configuration data (PID, calibration, etc.), in case of loss and/or data corruption. The restore of the machine to the factory settings is easy avoiding the need of any technical support.
Features
- The AUTOMAX PRO is quick and simple to operate, even for operators with limited expertise. The easy to use high definition graphical interface based on tablet and smart-phone display technology includes handy features such as graphical failure type, specimen geometry, and access to the latest testing standards.
- Standard testing features include: rapid approach, soft-touch test start, initial pause for specimen alignment, height/diameter correction factor, final calculation of effective load rate applied, peak sensitivity expressed in percentage, and saving of specimen failure type image.
- Fully automatic – time saving: Full test-cycle automation maximizes productivity and ensures tests are performed accurately according to pre-set methods, eliminating operator variables.
- Highly accurate and energy saving: Our DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
- Intuitive, quick and simple operation: The integrated control system features an intuitive 7” color graphical display, which works like a tablet or smart-phone, and makes AUTOMAX PRO quick and simple to operate.
- Standards compliant – peace of mind: Hardware and firmware are in total compliance with all the main international concrete testing standards including AS1012.9 and EN 12390-3
- Pioneering web services: WEBCARE Remote Assistance will enable connection to your testing system for remote technical support whilst the i-LAB cloud-based services will allow sharing of your data with authorized 3rd parties, including real time viewing of the test.
- Huge boost in efficiency and error elimination: LinK-LAB – Integrated testing station solution for seamless connection and data inputs from many ancillary devices for dimensional measurement, weight, bar code, etc.
Show 2 more features
- Multilingual functionality: The system is available in multiple languages and is fully compatible with non-Latin characters for Chinese, Cyrillic (and more)
- Compatible with Datamanager PC Software; suitable for remote control of the machine, data acquisition, processing and filing. Allows printout of customized test certificates.
Ordering information
| 50-C10F02 | AUTOMAX PRO SMART-Line fully automatic console |
|---|---|
| 50-C10D/3F | Electovalve for AUTOMAX PRO System to control a third frame |
| 50-C20E/4F | Electovalve for AUTOMAX PRO System to control a fourth frame |