Item TF-0GIWSKF
Electromechanical Universal Tester
- Series
- UNIFRAME 250
- Configuration
- 250 kN
The machine consists essentially of a robust two column high stiffness frame (200 kN/mm) with an upper crosshead, which is factory-preset at your desired height, and of a lower mobile bi-directional crosshead adjustable by the user using…
Technical specifications
| Maximum load in compression | 250 kN |
|---|---|
| Maximum load in tension | 150 kN |
| Max. vertical clearance, without accessories | 930 mm |
| Distance between columns | 650 mm |
| Crosshead travel | 400 mm |
| Crosshead displacement resolution | 0.0001 mm |
| Test speed range | 0.0001 to 175 (105 at full load) mm/min |
| Load rate range | 1 to 9999 N/sec |
| Power | 1 kW |
| Overall dimensions (hxlxd) | 2100 x 960 x 800 mm |
| Weight approx. | 600 kg |
| Hardware | 131.000 points effective resolution High frequency closed-loop P.I.D. control Control frequency 500 Hz Sampling rate 500 Hz 4 channels for load cells (not simoultaneously) 6 channels to measure displacement values with transducers (LVDT, magnetostrictive, potentiometric) 4 channels for strain measurement with strain gauges High resolution encoder (0.0001 mm) Memorization of the calibration curve enables sensors to be connected and used immediately Digital linearization of the calibration curve (multi-coefficient) |
| Software | DATAMANAGER software (a high specs PC is included) allows remote control of the whole system and the automatic execution of test including: fast approaching, zeroing, test execution, automatic test interruption after specimen failure or achievement of the target set by the user, numerical and graphical management of test results. Software modules are available for any test method, see accessories. |
Features
- High specs all-in-one PC
- Load cell 250 kN cap. Up to three other cells of lower capacity for tests on low strength materials can be connected (for not simoultaneous use)
- Adapters to connect main accessories
- DATAMANAGER Software for compression and flexural tests
Ordering information
| 70-T2502 | Automatic 250 kN electromechanical UTM machine designed to perform the following tests: Compression, flexure, indirect tensile strength (with Datamanager software module included); Elastic modulus and Poisson ratio determination on cement and mortar (optional software module required); Energy absorption by displacement/strain controlled test; Fibre Reinforced Concrete (optional software module required); Tensile strength of rebars up to 100 kN (optional software module required); Marshall, CBR, SCB and Duriez (optional software module required). |
|---|
Accessories
| 70-T2502/G1 | Grips for round specimens 7 to 14 mm dia. |
|---|---|
| 70-T2502/G3 | Grips for flat specimens 0 to 8 mm. |
| 70-T2502/G4 | Grips for flat specimens 8 to 15 mm. |
| 70-T2502/H | Upper and lower tensile heads to be completed with grips for round and flat specimens 70-T2502/GX. |
| 70-T2502/2 | Spherical seat and compression platens dia. 165mm |
| 70-T2502/FL | Lower crossbeam for flexure test (rollers not included). Max span between rollers 650mm |
| 70-T2502/EM | E-MODULE software package for Elastic modulus and Poisson ratio determination. |
| 70-T2502/DC | D-Control software package for energy absorption, displacement/strain controlled tests. |
| 70-T2502/UTS | UTS software package for rebars tensile testing. |
| 70-T2502/CMU | ROAD PC software package suitable for Marshall, CBR, Indirect Tensile, SCB, Duriez and Custom tests. |
Show 1 more items
| 50-C0050/CAL | Special factory calibration of load digital readout unit assuring Grade A from 1% of testing machine full scale (maximum load) |
|---|