Item TF-0KQ0GE2
Wizard Auto Standard Automatic Compression Machine
WIZARD AUTO is CONTROLS’ new standard automatic machine for compression and flexural testing.
Technical specifications
| WIZARD AUTO AUTOMATIC POWER AND CONTROL SYSTEM | Hydraulic |
|---|---|
| Max pressure | 700 bar |
| Power | 750 W |
| Dual stage pump | low pressure/high delivery for fast piston approach and high pressure/low delivery for loading. |
| Two 16 bit analog channels for load sensors | Wide graphic display 128 x 80 pixel |
| Sampling rate | 50 Hz |
| Internal memory | RS 232 port for data download (including load/time graph points) to PC in ASCII format |
| Real time display of load and stress | Automatic application of the selected load rate |
| Multiple units | Lbf / Ton / kN. |
| SAFETY FEATURES Includes | Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front and rear flexible transparent fragment guard (front rigid door available – see upgrading options) |
| Model 50- | C13W02 C13W04 — C23W02 C23W04 — C34W02 C34W04 |
| Capacity kN | 1500 — 2000 — 3000 |
| Max vertical daylight, mm* | 350 (13.4″) — 350 — 350 |
| Horizontal daylight, mm | 265 (10.4″) — 340 — 370 |
Show 6 more specifications
| Max. piston travel*, mm | 50 (2″) — 50 — 50 |
|---|---|
| Platen dimensions, mm | dia. 216 (8.5″) — dia. 216 — dia. 300 |
| Platen surface hardness | 55.5 HRC (600 HV) — 55.5 HRC — 55.5 HRC (600 HV) |
| Platens flatness toll, mm | 0.03 (0.0012″) — 0.03 — 0.03 (0.0012″) |
| Overall dimensions, mm | 810 x 425 x 1085 — 835 x 440 x 1090 — 805 x 450 x 1160 |
| Weight approx., kg | 305 — 525 — 755 |
Technical notes
- AC motor fitted with VFD inverter device featuring high efficiency, reduction of power consumption and silent operation.
- Second frame optional facility using valve selector.
- Hardware
- Integrated printer as optional. See accessories
- Firmware
- Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
- Peak detection and saving
- Language selection
- Multi-coefficient linearization of the calibration curve for better accuracy at low loads
- FRAME Rigid welded steel construction. Spherical seat allows free alignment at the initial contact with the specimen.
- PHYSICAL SPECIFICATION TABLE
Features
- QC testing performance has just taken a step change improvement with CONTROLS abandoning manual test control and now features automatic closed-loop PID control of loading-rate using VFD inverter-technology control of the high specification AC motor.
- Wizard Auto automatically and accurately performs tests at the correct test speed, ensuring compliance to Standards and with no effect due to operator variables.
- Mainly dedicated to routine failure tests (compression, flexure and indirect tensile), WIZARD AUTO is the perfect solution to ensure total certainty of testing accuracy and strict conformity to international Standards.
- Reduced opportunities for operator errors, improving accuracy of results and repeatability
- Easy-to-use: even for operators with limited expertise.
- Conforming to Standards: the machine automatically performs the test at correct test speed. Conformance to Standards can be easily proven.
- High performance: high speed pump closes the daylight above the specimen at the fasted speed allowing a very high throughput of tests.
- Operator comfort due to the significant noise reduction.
Show 1 more features
- Energy saving, with 50% reduction in energy consumption.
Ordering information
| 50-C13W02 | WIZARD Auto Automatic Compact-Line General Utility compression tester, 1500 kN cap., for cubes up to 150 mm and cylinders up to dia. 160 x 320 mm. 230 V, 50-60 Hz, 1 ph. |
|---|---|
| 50-C23W02 | WIZARD Auto Automatic Compact-Line General Utility compression tester, 2000 kN cap., for cubes up to 150 mm and cylinders up to dia. 160 x 320 mm. 230 V, 50-60 Hz, 1 ph. |
| 50-C34W02 | As above but 3000 kN cap., for cubes up to 200 mm and cylinders up to dia. 160 x 320 mm. 230 V, 50-60 Hz, 1 ph. |
| — | (To be specified at time of order) |
| — | Serial printer for Wizard testers 50-Q60W/PR Upgrade of a WIZARD AUTO system to incorporate a serial printer in the rear panel, allowing results to be printed at the end of test |
| — | Second frame connection The WIZARD AUTO System can be upgraded with a hydraulic valve for controlling (not simultaneously) a second frame. |
| 50-C10W/2F | Two-way valve to control a second frame. |
| — | Special calibration procedure 50-C0050/CAL Special calibration of compression testers assuring Grade A from 1% to full load range. |
| — | Front door |
| Accessories suitable for 50- | C13W02 C13W04 — C23W02 C23W04 — C34W02 C34W04 |
Show 4 more items
| Front door | 50-A19/FG — 50-C29/FG — 50-C39/FG |
|---|---|
| — | Frame pedestal |
| Frame pedestal | 50-A19/B — 50-C29/B — 50-C39/B |
| — | Fragment guard lock switch 50-C50/P1 Fragment guard lock switch. To prevent test execution with the front door open. |